Uniden DXAI388-2 Owner's Manual page 19

To enter your Area Code
If you enter a 3-digit area code number in the
code does not appear in Caller ID messages. Do not program this option, if your
calling area requires 10-digit dialing.
When reviewing Caller ID messages, you will see only the local seven digit number.
For calls received from outside your local area code, you will see a full 10-digit number.
1) When the phone is in the standby mode, press and hold
cid/menu. The Caller ID setting screen appears.
2) Press 3 or press twice to select ¨
3) Press select/channel.
4) Use the number keys (0 to 9), #/
delete/transfer to enter the 3-digit area code.
5) Press select/channel. A confirmation tone sounds and the displayed area code is
entered.
6) Press end or return the handset to the main base unit. The handset returns to the
standby mode.
When the area code has already been stored in memory, the
stored area code will be displayed. To change it, use the
delete/transfer and number keys to enter the new area code.
Then press select/channel. A confirmation tone sounds.
To complete the setting, press end or return the handset to the
main base unit.
option, your local area
¨.
*
, /tone/ or
G E T T I N G S T A R T E D [ 17 ]