Uniden DXAI388-2 Owner's Manual page 47

Selecting the message record time
You have three record time options. The options "1 minute" or "4 minutes" set the
duration for recording the incoming messages. "Announce only" answers the call
with the preset greeting or your personal greeting but prevents the caller from leav-
ing a message.
1) Press menu four times.
status
2) Press repeat/rew or skip/ff until the desired time appears.
3) Press set/ringer to select the new recording time. You hear a
M Announce only feature
The announce only feature plays a prerecorded outgoing message "Hello, no one is
available to take your call. Please call again.", but it will not allow the caller to
leave a message. To set "Announce only", follow the steps above.
To scroll between the prerecorded message or your own personal greeting, press
greeting when the outgoing message is played. If you want to use your own greet-
ing, you may want to change your greeting to omit the prompt "to leave a message".
Refer to "Recording a personal outgoing message" (Greeting) on page 47.
You hear "Record time" and the current recording time ([
1 minute, [ ] 4 minutes, [
displayed on the main base.
confirmation tone, then the announcement "Record time" and
new recording time is announced.
] Announce only), and it is
T H E I N T E G R A T E D A N S W E R I N G D E V I C E
]
When using the
Announce only feature,
you may want to
change your outgoing
message, if the message
prompts the caller to
leave a message. The
prerecorded message
changes automatically.
[ 45 ]