Advertisement
7. Install the plate-mount bracket to the seat base side
using 4 pop rivets (3/16 x 0.92 inch) as shown in
Figure
12.
Figure 12
Left Side of the Machine Shown
1. Seat base side
2. Plate-mount bracket
8. Install the speed plate to the plate-mount bracket using
3 pop rivets (3/16 x 0.92 inch) as shown in
Figure 13
Left Side of the Machine Shown
1. Plate-mount bracket
2. Speed plate
9. Repeat the procedure for the right side of the machine.
3. Pop rivet (3/16 x 0.92 inch)
Figure
13.
3. Pop rivet (3/16 x 0.92 inch)
Installing the Speed Plate to the Tailgate
1. On the right side of the tailgate, measure 95 mm (3.75
inches) from the right edge of the tailgate and 70 mm
(2.75 inches) from the top of the tailgate, and mark
the location
(Figure
2. Measure 128 mm (5.02 inches) down from the hole
marked in step
1
and left and mark the 2 locations
3. Drill a 5 mm (13/64 inch) hole at each of the 3 marked
locations
(Figure
Important: Drill through only 1 wall of the
tailgate.
1. 74 mm (2.9 inches)
2. 95 mm (3.75 inches)
3. 70 mm (2.75 inches)
4. Install the speed plate to the tailgate using 3 pop rivets
(3/16 x 0.92 inch) as shown in
1. Speed plate
7
14).
and 74 mm (2.9 inches) to the right
(Figure
14).
14).
Figure 14
4. 128 mm (5.02 inches)
5. Drill at these 3 locations.
Figure
15.
Figure 15
2. Pop rivet (3/16 x 0.92 inch)
Advertisement
