Bearing Lube
(P/N.211337)
Gearcase
Attaching Shaft
GEARCASE
MAINTENANCE INTERVAL
The gearcase should be checked for lubrication after each 30 hours of use.
GEARCASE LUBRICATION
Remove the cutting attachment and the boss adapter . Clean any dirt and debris from the
area between the boss adapter and the gearcase. Remove the grease plug from the side
of the gearcase.While rotating the attaching shaft, inject lithium-base bearing lube
(P/N. 211337) through the plug hole until the gearcase is full.Reinstall the boss adapter
and grease plug.
.
(
.
.
.
(P/N. 211337)
Grease Plug
Plug Hole
Boss Adapter
30
.
.
.
,
No. 211337)
30
.
.
.
,
,
.
.
- 26 -