Wall.mounting.the.base - Uniden DECT2060 Series Owner's Manual

Wall Mounting the Base
This.phone.can.be.mounted.on.any.standard.wall.plate.
) Snap.the.wall.mount.adapter.into.the.notches.on.the.base's.back.
2) Plug.the.AC.adapter.into.the.DC IN 9V.jack.
3) Plug.the.AC.adapter.into.a.standard.20V.AC.wall.outlet.
4) Plug.the.telephone.cord.into.the.TEL LINE.jack.
5) Route.the.telephone.cord.through.the.hole.of.the.wall.mount.
adapter.as.shown.
6) Plug.the.telephone.cord.into.the.telephone.wall.jack.
7) Align.the.mounting.slots.on.the.base.with.the.mounting.posts.on..
the wall. Then push in and down until the phone is firmly seated.
Notes:
• DO.NOT.use.an.AC.outlet.controlled.by.a.wall.
switch.
• To.mount.the.phone.directly.on.the.wall,.insert.two.
#0.screws.(minimum.length.of..
supplied).into.the.wall,.3.
the.screw.heads. / .inch.away.from.the.wall.to.allow.

8
room.for.mounting.the.phone..Be.sure.the.wall.is.
capable.of.supporting.the.weight.of.the.phone,.and.
use.the.proper.type.of.anchoring.device.for.the.
wall.material..No.need.to.route.the.telephone.cord.
through.the.hole.of.the.wall.mount.adapter.when.
mounting.directly.on.the.wall.
/ .inches,.not.
3
8
/ .inches.apart;.leave.
5
6
6
Route the cord. Route the cord.
AC adapter (supplied) AC adapter (supplied)
Wall plate Wall plate
AC outlet AC outlet