Safety Information SET UP YOUR SHELTER PROPERLY Please read and understand this entire manual before attempt to assemble, operate, or install the product. If any part is missing or damaged. Do not attempt to assemble the product. Two to four people are needed for assembly. In order to avoid damage to the gazebo and its components please use appropriate tools.
Item Description Illustration Post Post Post Post Fence Crossbar Bend crossbar Bend crossbar Supporting pole Roof tube Stake Canopy Hook Short screw M6 x 15mm Long screw M6 x 35mm Hex wrench...
Page 5
1. Insert long screw (BB) through fence (E) secure with post (A), then repeat for other side of fence (E) and post (C) as figure 1 shown. 2. Insert long screw (BB) through bend crossbar (G) secure with post (A), then repeat for other side of bend crossbar (G) and post (C) as figure 2 shown.
Page 6
1. Insert long screw (BB) through fence (E) secure with post (B), then repeat for other side of fence (E) and post (D) as figure 1 shown. 2. Insert long screw (BB) through bend crossbar (H) secure with post (B), then repeat for other side of bend crossbar (H) and post (D) as figure 2 shown.
Page 7
1. Insert long screw (BB) through crossbar (F) secure with post (A), then repeat for other side of crossbar (F) and post (B) as figure 1 shown. Repeat this step for remaining crossbar (F).
Page 8
1. Insert short screw (AA) through supporting pole (I) secure with bend crossbar (G), then repeat for other side of supporting pole (I) and bend crossbar (H). Repeat for remaining supporting pole (I).
Page 9
1. Place roof tube (J) onto supporting pole (I), then secure roof tube (J) with supporting pole (I) by using short screw (AA), then repeat for other side of roof tube (J) as figure shown.
Page 10
1. Place the canopy (L) onto the top frame, then secure the hook of canopy into the hole of bend crossbar (H) as figure 1 shown. Repeat this step for other hooks of canopy. 2. Hang 4 hooks on each fence (E) as figure 2 shown. 3.
Need help?
Do you have a question about the L-GG076PST and is the answer not in the manual?
Questions and answers