Summary of Contents for Essential Garden UCG-KSN#09360100-3
Page 1
garden USE AND CARE GUIDE STEEL GRILL GAZEBO Please refer to part numbers when reordering CAUTION: Carefully read instructions and procedures for safe operation. For questions or comments about product: Product Code: 0-09360100-3 Email: kmart@sunjoygroup.com or Call toll-free: 1-866-578-6569 UPC Code: 841057148266 Made in / Hecho en CHINA.
Page 3
Thank you for your purchase! Thank you for your purchase ! We are pleased that you have chosen Kmart for your outdoor gazebo purchase. We hope that you enjoy the unmatched quality, comfort, and style of your new patio item. Every piece is meticulously considered all the way down to the smallest details, exclusively for you, by our world class design team.
Page 4
Safety Information WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC. The tent is made with fabric that meets CPAI-84 specifications for flame resistance. It is not fire proof. The fabric will burn if left in continuous contact with any flame source.
Page 5
Care and Maintenance Assembly Instructions Steel components of garden accessories and furniture are treated with rust-inhibiting paint to protect them from rust. However, due to the nature of steel, surface oxidation Fig.10: Insert the opposite side of horizontal (rusting) will occur if this protective coating is scratched. This is normal. To minimize bar (I) into back arc tube (N).
Page 6
Pre-Assembly (continued) Assembly Instructions Fig.6: Insert horizontal bar (I) into front arc tube (K) (Note face up the side with screw hole). Fig.7: Insert the opposite side of horizontal bar (I) into front arc tube (L). Fig.8: Insert assembled front arc tube (L&K) into side support frame (G).
Page 7
Assembly Instructions Pre-Assembly (continued) P P a a r r ts L L i i st Hardware Pack 2 Long Pole (1) M6X15 bolt 2 PCS Long Pole (2) M6 washer 2 PCS Short Pole (1) Φ 8X180MM stake 4 PCS Short Pole (2) Horizontal screen Bottom horizontal tub...
Page 8
Assembly Instructions Assembly Instructions Fig.1: Place long pole (A) or long pole(B) on the Hardware Pack1 ground, then connect Side support frame (G) together by Bolt ( AA) and Washer (BB ). M6X15 Bolt 24 PCS M6 Washer 24 PCS M6 Wrench 1 PC Fig.2:Place short pole (C) or short pole (D) on the...
Need help?
Do you have a question about the UCG-KSN#09360100-3 and is the answer not in the manual?
Questions and answers