Huawei OceanStor CloudStor CSE Quick Installation Manual page 12

Powering On the System and Checking Indicator Status
1
Device Power-On Sequence
Connect the
Power on the
cabinet to the
LAN Switch
external power
Before power-on, switches of all devices must be in the off state. This section uses an SD-Node as an example to
explain how to power on a device. Power on other devices in the same way.
Power on the SMS modem by connecting it to an external power supply. Power on the other devices by pressing their
power buttons.
2
Pressing the Power Button on an SD-Node
3
Checking Status Indicators of an SD-Node
An SD-Node and a C-Node have identical hardware devices. This section uses an SD-Node as an example to
describe indicator status.
a
Status Indicators of an SD-Node (Front View)
Name
No.
1 System power indicator
2 Disk online indicator
3 System alarm/location indicator
Power on the
Power on the
back-end
KVM
storage devices
Normal State
Steady green
Steady green
Off, The device runs normally.
12
Power on the Power on the
SD-Node C-Node
Mandatory
Power on the
modem
Optional