Table of Contents
Advertisement
Chapter 2
2 - 4
3. Secure the unit to the rack using screws provided by the rack
manufacturer.
The unit must be securely fastened to the rack to provide adequate
stability and to prevent the unit from falling out of the rack.
If the rack you have does not provide adequate support for the unit, you may
need a shelf kit. We recommend that you use a shelf kit created by the rack
manufacturer. (Some rack manufacturers provide shelf kits for their racks.)
Figure 2.2 shows an example of a 6900/8900 platform installed in a rack
using the front-mounting brackets.
Figure 2.2 6900/8900 platform installed in a 19" rack
Regardless of which mounting type you use to install the unit, you finish the
installation by connecting the cables and other hardware. This procedure is
described in Connecting the cables and other hardware, on page 2-10.
Advertisement
Table of Contents
