3. PRODUCT OVERVIEW
3.4 OVERVIEW OF CONNECTIONS
DC-fault
protection
connection
ethernet port
DC-fault
protection
module
neutral wire
connection
phase wire
connection
earth wire
connection
power cable
cable clamp
If connecting to a 3-phase grid without neutral; only install 1-phase and connect one of the two other phase wires
in the neutral wire connection on the terminal block.
INSTALLATIEHANDLEIDING – P10
INSTRUCTION MANUAL – P10 | P10
VERSION 0129NM02INT01
0381NM02INT02
Dip switches for
settings
earthing pole
connection
earthing
pole
inlet for
data cable