Display A Programmed Number - Uniden 8985 Owner's Manual

29
4
Press the or
•
select "Edit Memory",
then press select/ch
The following screen appears.
The cursor flashes indicating that the display is ready for the
name to be edited. When a name has not been stored, the
cursor appears at the beginning of the second line.
5
Press ,
•
ª
name. (See page 24.)
To edit only the phone number, skip this step.
6
select/ch
Press
The following screen appears.
The cursor flashes indicating
that the display is ready for the number to be edited.
7
Use the dial keypad,
number.
The phone number cannot exceed 20 digits. (See page 24.)
When the phone number will not be edited, skip this step.
8
Press
select/ch
The handset beeps and displays
the confirmation screen. The
memory storage is complete.
For example, if you store a name and number into memory location
number 01, the display shows
After about 2 seconds,
"Memory Store" is
displayed.
9
Press to return to standby mode.
mem

Display a Programmed Number

#/
Use the and
1
display and the numbers display.
Program name
Memory Store
01 UNIDEN CORP
02 JOHN DOE
• When the stored phone number has 14 or more digits, " \" is
displayed next to the 12th digit.
Press to see the extra digits and
#/
1
Memory Store
06 011813554329
07
key to
ª
UNIDEN CORP
.
#/ /tone/
, ,
1 * 0
.
817858330
, or
redial/p
.
Memory01 Stored
Memory01 stored
"
01 UNIDEN CORP
02 JOHN DOE
/tone/
* 0 key to toggle between the names
1
1
1
1
Store Name
del
, or to edit the
Store Number
key to edit the phone
del
"
.
Memory Store
Program number
Memory Store
01 8178583300
02 5452930
to return.
/tone/
*
0
Memory Store
300000