Step 3: Preparing The Battery Pack - Uniden 8985 Owner's Manual

Use only Uniden Battery
BT-905.
Preparing the battery pack
Charge the battery pack for more than 12-15 hours before you start
using your phone.
Black
Red
status LED
1
Remove the battery cover.
2
Connect the battery pack
connector with the correct
polarity (black and red wires),
then insert the battery pack
into the battery compartment.
3
Slide the battery cover forward
until it snaps into place.
4
Place the handset on the base.
Total:00
Make sure that the " status "
LED of the base unit lights, and
charging begins. Charge the
battery for at least 12-15 hours.
You can place the handset
either side up for charging the
battery.
10