Telephone Key And Switch Functions - Uniden FP205 Owner's Manual

TIP
For 'Call Waiting' to
operate you must
subscribe to this service
through your local
telephone company.
If you do not have this
service, then pressing the
flash button during a call
may disconnect the caller.
FP205 OM Page5 FP205 OM Page5

TELEPHONE KEY and SWITCH FUNCTIONS

Ring Volume (Hi/Lo/Off)
Set the ring volume switch to the desired level (Hi, Lo or Off). The maximum level is
Hi. The switch is located at the back of the unit.
Ring Pitch (Hi/Lo)
Set the ring pitch switch to the desired level (Hi or Lo). The switch is located at the
back of the unit.
Regular dialling
Lift the handset and listen for dial tone. Then enter the telephone number you wish to
call. The dialled number will appear on the display screen whenever you make a call.
Redial function
To redial the previous number you called. Lift the handset or press
press REDIAL .
Last 10 number redial
1. With the handset on the cradle press
2. Press or to review the last 10 numbers dialled.
3. Pick up the handset or press
Pause function
To insert a temporary pause. Press the
quence. For example, in some cases when dialling an international number you need
to place a pause between the clusters of numbers to allow the telephone company,
relaying the call, time to process it. The number 011-886-22-795-1234 would need to
be dialled 011 /pause 886,
REDIAL
1234.
Mute button
For privacy when you are required to consult with a person standing next to you and
do not wish the party on the line to hear your conversation, press
be displayed. Press again to resume the conversation.
MUTE
Handset Volume
During the conversation press
VOL+
between volume 1 (min) and volume 4 (max).
Flash button - Call Waiting
If the Call Waiting tone sounds while you are on a call -
New Zealand: Press the button to switch between callers.
FLASH
Australia: Press then
FLASH
Speaker Button
To switch your call to speaker phone, press
back, simply pick up the handset and speak. You can make, receive and dial in the
speaker mode.
Speaker Volume
During the conversation press
VOL+
between volume 1 (min) and volume 4 (max).
REDIAL .
to dial the selected number.
/pause button during a dialling se-
REDIAL
/pause 22, /pause795,
REDIAL REDIAL
or to set the desired handset volume
VOL -
to switch between callers.
and hang up the handset. To switch
or to set the desired speaker volume
VOL -
5
and then
/pause
REDIAL
. MUTE will
MUTE
24/9/07 2:38:14 PM 24/9/07 2:38:14 PM