D-Link Air DWL-810 Quick Installation Manual page 6

Configuration
Click Wireless in
the Configuration
menu. This screen
will appear.
Select Infrastructure
The default wireless
settings are:
SSID = default
Channel = 6
You can change the
SSID and Channel
settings to match an
existing wireless
network.
Click on
Apply
Changes will not take effect until you reboot the DWL-810. To reboot,
click on Admin at the top of this screen. In the Admin window, click
reboot to save the changes.
You have completed the Configuration of the DWL-810!
APPENDIX
Assigning a Static IP Address in Windows
To assign a Static IP Address to the laptop or computer that you are using to configure
the DWL-810, please do the following:
(The following illustrations show Windows XP with the D-Link DWL-650+
Wireless Cardbus Adapter. Other operating systems and other wireless
network adapters will have similar procedures for assigning a Static IP
Address.)
If the computer you are using for configuration already has a Static IP
Address, be sure to make a note of it. You will need to re-input the
original Static IP Address after you configure the DWL-810.
default