Table of Contents
Advertisement
1. Menu Input Type
Input Type
Mode
Thermocouple
Menu Input Type is for setting type of input. DP70 has 6 type of input which
is Thermocouple, RTD, R (Ohm), mV, Voltage and Current as detail below
Thermocouple Input
Thermocouple
Type R
Type S
Set up Thermocouple Input push Mode button for 3 second then choose
using
select thermocouple type R, S, K, E, J, T, and B. click on Exit button to go the
next step.
RTD Input
Set up RTD Input push Mode for 3 second then choose
then select
PT100, PT1000 then click Exit button to go to the next step.
R (Ohm) Input
Setting R (Ohm) Input by click Mode button and hold for 3 second then
setting menu will appear
input then click
Ω, 4000 Ω then click on Exit button to go to the next step.
Wisnu and Supak Co., Ltd 102/111-112 Tessabansongkroh Rd., Ladyao, Jatujak, Bangkok 10900
Tel (662)591-1916, (662)954-3280-1, Fax (662)580-4427, www.wisco.co.th, E-mail
Setting Menu for DP70
Mode
RTD
R (Ohm)
Type K
to
choose
RTD
CU 10
then using
R (Ohm)
600 Ω
1200 Ω
to select type of desire input which are Type 600 Ω, 1200
WISCO DP70 Manual V2.0
Mode
Mode
mV
Type E
Type J
for
thermocouple then
PT 100
PT 1000
button to select type of RTD which is Cu10,
4000 Ω
click on mode button to select
Mode
Voltage
Current
Type T
Type B
using
click Mode
Page 5 of 13
info@wisco.co.th
to
for
Advertisement
Table of Contents
