Universal Input Indicator - Wisco Industries DP70 Manual

Universal Input Indicator

Universal Input Indicator is panel meter with programmable input. It has
5 digit and 2 set of alarm (Hi/Low). Moreover there is optional for analog output
Specifications
Serial Interface (Optional)
Serial Standards:
RS485 (Isolated)
2 Pin Terminal Block
Loading:
RS485 Max 32 Unit
Distance:
RS485 Length 1 Km.
Protocol:
MODBUS ASCII/RTU
Supply Software:
Citect, Wonderware, LAB
View etc.
Monitor
Display:
5 digits, 14.2 mm. (7-Segment)
Display Color:
Red (std)
Analog Input
Number of channel:
Input type:
Programmable
Input range:
Thermocouple (R, S, K, E, J, T, B)
RTD (Cu10, PT100, PT1000)
Resistance (0 to 600 Ω, 0 to 1200 Ω,
0 to 4000 Ω)
Voltage mVDC (0 to 80, 0 to 150 mVDC)
Voltage (0 to 1, 0 to 5, 0 to 10, 0 to 30 VDC)
Current (4 to 20, 0 to 20, 0 to 40 mA)
ADC Resolution:
16 bits
Accuracy:
± 1 least significant digit
Analog Output (Optional)
Number of channel:
Output type:
Current, Voltage
Output range:
Current (0 to 20, 4 to 20 mA)
Wisnu and Supak Co., Ltd 102/111-112 Tessabansongkroh Rd., Ladyao, Jatujak, Bangkok 10900
Tel (662)591-1916, (662)954-3280-1, Fax (662)580-4427, www.wisco.co.th, E-mail
DP70
1 Channel
1 Channel
WISCO DP70 Manual V2.0
5 Digits Display
-
Programmable Input type
-
2 Alarm Relay
-
1 Analog output or RS485
-
(Option)
Voltage (0 to 1, 0 to 5, 0 to 10 VDC)
Output Impedance:
Current Max Load 800 Ω
Voltage Min Load 1000 Ω
Relay Output
Number of Channel:
Relay Type:
N.O. or N.C.
Contact Rating:
6A@250VAC, 6A@30VDC
Power Requirements
Power Supply:
85 to 230 VAC
(12 to 35 VDC Optional)
Environmental Limits
Operating Temperature:
Operating Humidity:
Storage Temperature:
Physical Characteristics
Dimension:
W96 x H48 x D120 mm.
Panel Cutout:
W90 x H40 mm.
Mounting:
Panel Flush Mounting
Wiring:
Screw terminals
Warranty
Warranty Period:
2 Channels (Alarm)
0 to 55 °C
5 to 95% RH
0 to 70 °C
5 Year
Page 1 of 13
info@wisco.co.th