Cleaning & Maintenance - Progetto EVO EV105 Installation Instructions & User Manual

Cleaning & Maintenance
Manual cleaning of spray nozzle
- Gently pull out the nozzle and apply a
neutral detergent with a soft cloth, sponge
or small brush.
- Gently supporting the nozzle, wipe the
spray tube and nozzle.
Cleaning the filter
Tips:
- Make sure that the water supply is turned off and the power is off before you clean the filter.
- Clean the filter when the water flow is less than normal hours.
- Remove the filter from the water inlet hose to clean it.
- Re-install the filter in reverse order after cleaning.
Product surface cleaning
Note: Please turn off the power supply before cleaning.
- Wipe the product surface with a sponge or soft cloth dampened with lukewarm water or a
neutral detergent.
- Lift the upper cover and the seat ring when cleaning the toilet bowl.
- Do not put lid/seat down until the toilet bowl is completely cleaned, or the bidet seat
surface may be damaged by the cleaning chemicals.
2
A
A
Braided hose
Filter
14