Method Of Use - Progetto EVO EV105 Installation Instructions & User Manual

Method of Use - Function Settings
Function settings instructions
Water temperature
adjustment indicator
Water temperature
adjustment key
High
High
Protection functions:
1.Low temperature scalding protection function: 5min after being seated, the product
will be under low temperature scalding protection mode with a temperature of about 29℃.
2.Alarm function: when you are not seated and the control knob is not closed, the product will
sound an alarm.
3.Water temperature protection function
(1)When the water temperature exceeds 43℃ during use, the flushing water will be turned off
and the product automatically switch to self-cleaning mode.
(2)After the water temperature returns to normal, the flushing can be continued.
Note: After the rinse is over, turn the knob to the neutral stop position to prevent splashing.
Normal use during power failure
The water temperature and seat temperature cannot be adjusted when the power supply is
cut off, but flushing with normal temperature can be used normally.
Function settings key
Seat temperature
adjustment indicator
Seat temperature
adjustment key
OFF
Low
OFF
Low
Light OFF
Repeatedly pressing "
temperature in the sequence indicated in
the left diagram.
When you turn off the water temperature you
will hear a two second "beep"; When you switch
over there will be a one second "beep".
Water temperature low gear: about 35℃.
Water temperature high gear: about 38℃.
Repeatedly pressing "
temperature in the sequence indicated in
the left diagram.
When you turn off the water temperature you will
hear a two second "beep"; When you switchover
there will be a one second "beep".
Seat temperature low gear: about 33℃.
Seat temperature high gear: about 37℃.
Prompt
Light ON Highlighted
" will switch over water
" will switch over water
13