Table of Contents
Advertisement
Additional buttons 1 to 4
The functionality of the additional buttons is user-defined and can be used, for example, for a start/stop
function for individual movements etc.
Signal LEDs
The controls for the LEDs can be controlled in a user-defined way via the AS-i Bus.
They usually signal when the process is approved and whether the enabling button is ready.
Home position detector
This function, in conjunction with the HD5-M-001 holder, provides information as to whether the enabling
device is in its holder.
Assist light
(flashlight)
This can be turned on in a way that is defined by the user, so that the work areas can light up for a short,
selected length of time.
Caution!
section 3. "Functional description"
Please pay attention to the instructions in
2CDC172107D0201
18
www.abb.com/lowvoltage
2019-09-06
V2.6
Advertisement
Table of Contents
