Section 5 Maintenance; Section 6 Battery Replacement; Figure 6-1 Battery Compartment - Will Burt Nightscan Spot Operator's Manual

Section 5
As needed, use a clean, soft cloth, mild soap, and water to clean the lens.
Note: The Night Scan Spot uses Lexan lenses and cleaning with abrasive materials, solvents, or
most chemical cleaners can cause lens surface degradation and reduce performance of the
light. Some chemicals will cause the lens to become brittle and prone to cracking.
Section 6
To replace the battery in a Remote Control (Figure 6-1):
1. Turn the Remote Control over to access the back.
2. Remove the screw securing the battery cover.
3. Remove the battery.
4. Replace the battery with 23A (12V) battery.
5. Replace and secure the battery cover.
Battery
Cover
Back of Remote Control
TP-5590101-B
October 2019
Maintenance
Battery Replacement
Battery
Cover

Figure 6-1 Battery Compartment

N S S O
IGHT CAN POT PERATOR
Battery Cover Removed
'
M
S ANUAL
7