Section 3
The Remote Control is used to operate the Night Scan Spot as shown in Table 2 and Figure
3-1.
Symbol
ON/OFF. Press to toggle power the light
on and off. Turning the light off disables all
other button function.
Up Arrow. Press and hold to raise the light
beam. The light will rotate upward to a
maximum of 70°.
Left Arrow. Press and hold to pan left.
TP-5590101-B
October 2019
Operation
Table 2 Button Function
Function
Indicator
UP Arrow
Left Arrow
ON/OFF
Figure 3-1 Remote Control
N
S
S
IGHT
CAN
POT
Symbol
Warning Signal. Press to toggle the
Warning Signal on and off. When on, the
light alternates between flashing 3 long
flashes and 3 short flashes.
Down Arrow. Press and hold to lower the
light beam. The light will rotate downward
to a maximum of 45°.
Right Arrow. Press and hold to pan right.
Right Arrow
Down Arrow
Warning Signal
'
O
M
PERATOR
S
ANUAL
Function
5