Output Settings - Yamaha MTX Series Setup Manual

 OUTPUT settings
Port select button
Port / External Device
parameter access
button
DELAY / Room EQ
Speaker processor
[ON] button
Fader
Channel name
Example 1) Basic MTX3 system example (analog connections)
Port select button
Click this to open the "Output Patch" dialog box. In this example we will use the
default settings, but if you want to use a different output port of the MTX, click
this button, choose the desired output port, and then click the [Close] button.
Port / External Device parameter access button
When you click this button, the MTX output connector parameter
edit screen will appear as a popup. Verify that GAIN is set to 0.0 dB.
DELAY / Room EQ
Click this to move to a screen where you can set delay and room EQ.
Speaker processor
Click this to move to the "CHANNEL EDIT" screen. Make the appropriate set-
tings for the speakers that will be connected.
NOTE
The pre-installed library contains speaker processor files that are appropriate
for the response of various speakers. By using these files you can make
speaker processor settings easily.
[ON] button
This button turns the channel on/off. Turn off unused channels.
Fader
This adjusts the output level.
Channel name
You can double-click this to edit the name.
In this example, names have been assigned as follows.
OUT1 Hall A
OUT2 Hall B
OUT3 Entrance
OUT4 Kitchen
17
MTX Setup Manual