Yamaha MTX Series Setup Manual page 103

Example 4) A system using Dante

Settings in the "ZONE" screen
In the "ZONE" screen you can make Priority DUCKER settings. The Priority Ducker function temporarily attenuates
the inputs from other channels when audio is input from a specified input channel, ensuring that the audio from the
st nd
specified input channel will be broadcast clearly. Priority is given in the order of "1 PRIORITY > 2 PRIORITY >
Matrix Out signals."
ZONE select
button
In this example, we are assuming that the main A mic (CH1) and the other MTX/MRX System's mic (CH9) will be
st nd
used for broadcast to the entire building. Thus, for 1 PRIORITY, we set the PRIORITY SOURCE to CH1; as the 2
PRIORITY SOURCE we select CH9 in ZONE1, and click the [ON] button located at the right to make it light. Because
st
there's no need to make settings for zones 2 through 8, make sure that the [ON] button at the right of 1 PRIORITY
nd
and 2 PRIORITY are unlit (turned off).
Use the ZONE select buttons to switch the zone.
For details on each parameter, refer to "MTX-MRX Editor User Guide."
103
MTX Setup Manual