PREPARATION FOR USE – UNPACKING
Your shipping carton should include the Logic Probe with 0.5 meter long cable
with a mini-alligator clip for the ground connection and a mini-grabber for the Vcc
connection and this manual. If any of the items are damaged or missing,
immediately return the complete package to the place of purchase for an
exchange.
INTRODUCTION
The LP10A and LP25A Logic Probes are logic troubleshooting instruments that give
visual (LED's) and audio indications (LP25A only) of logic levels and pulses. They
will also capture positive or negative events as short as 30 nanoseconds. The
probe is powered by the circuit under test.
1
Need help?
Do you have a question about the Meterman LP10A and is the answer not in the manual?
Questions and answers