Certifications And Precautions - Wavetek Meterman LP10A Operator's Manual

so the above limitations or exclusions may not apply to you. This warranty gives
you specific legal rights, and you may also have other rights that vary from state to
state.

CERTIFICATIONS AND PRECAUTIONS

This instrument is EMC/EMI certified. All inputs are protected against continuous
overload conditions up to the limits of each function's stated input protection (see
specifications). Never exceed these limits or the ratings marked on the instrument
itself. Always inspect your Logic Probe, test leads and accessories for signs of
damage or abnormality before every use. If an abnormal condition exists (broken or
damaged test leads, cracked case, display not reading, etc.), do not use. Never
ground yourself when taking measurements. Do not touch exposed metal pipes,
outlets, fixtures, etc., which might be at ground potential. Keep your body isolated
from ground and never touch exposed wiring, connections, test probe tips, or any
live circuit conductors. Do not operate instrument in an explosive atmosphere
iv