Draper 55365 Manual
  1. Manuals
  2. Brands
  3. Draper Manuals
  4. Impact Driver
  5. 55365
  6. Manual
Draper 55365 Manual

Draper 55365 Manual

20v brushless 1/2" sq. dr. mid-torque impact wrench
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
20V BRUSHLESS 1/2" SQ. DR.
MID-TORQUE
IMPACT
WRENCH
55365 & 97777
These instructions accompanying the product are the original instructions. This document is part of the product, keep
it for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before
assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed,
and contains all the necessary information to ensure its correct and safe use. By following all the general safety
instructions contained in this manual, it will ensure both product and operator safety, together with longer life of the
product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools
policy of continuous improvement determines the right to make modifications without prior warning.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 55365 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Draper 55365

Summary of Contents for Draper 55365

  • Page 1 AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.

  • Page 2: Title Page 1.1 Introduction

    Commercial copying, redistribution, hiring or lending is prohibited. No part of this publication may be stored in a retrieval system or transmitted in any other form or means without written permission from Draper Tools Limited. In all cases this copyright notice must remain intact.

  • Page 3: Table Of Contents

    CONTENTS TITLE PAGE INTRODUCTION ........................2 REVISION HISTORY........................ 2 UNDERSTANDING THIS MANUAL ..................2 COPYRIGHT NOTICE......................2 CONTENTS CONTENTS..........................3 WARRANTY WARRANTY..........................4 INTRODUCTION SCOPE .............................5 SPECIFICATION ........................5 HANDLING AND STORAGE ....................6 HEALTH AND SAFETY INFORMATION GENERAL SAFETY INSTRUCTIONS FOR POWER TOOL USE ...........7 SPECIFIC SAFETY INSTRUCTIONS FOR IMPACT WRENCH USE........8 RESIDUAL RISK ........................9 SAFETY INSTRUCTIONS FOR MAINS POWERED BATTERY PACKS...

  • Page 4: Warranty

    This warranty applies in lieu of any other warranty expressed or implied and variations of its terms are not authorised. Your Draper warranty is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the warranty period.

  • Page 5: Introduction

    Vibration level (main handle): ....................19.1m/s² Uncertainty (K) ......................1.5m/s² Maximum running time (no load) ............... 60 minutes (approx.) Weight (machine only):......................1.55kg Battery pack: 00649 (sold separately for 55365) Part No.: ......................... D20B3.0AH Type:..........................Li-ion Rated voltage: ........................20V Rating: ..........................2 ×...

  • Page 6: Handling And Storage

    INTRODUCTION 4.3 HANDLING AND STORAGE – Care must be taken when handling this product. ● Dropping this power tool could have an effect on its accuracy and could also result in personal injury. This product is not a toy and must be respected. –...

  • Page 7: Health And Safety Information

    HEALTH AND SAFETY INFORMATION 5.1 GENERAL SAFETY INSTRUCTIONS FOR POWER TOOL USE When using any type of power tool there are steps that should be taken to make sure that you, as the user, remain safe. Common sense and a respect for the tool will help reduce the risk of injury. Read the instruction manual fully.

  • Page 8: Specific Safety Instructions For Impact Wrench Use

    5.2 SPECIFIC SAFETY INSTRUCTIONS FOR IMPACT WRENCH USE Important: Draper Tools Limited recommends that this machine should not be modified or used for any application other than that for which it was designed. If you are unsure of its relative applications do not hesitate to contact us in writing and we will advise you.

  • Page 9: Residual Risk

    D.C. sources. Do not use a mains socket outlet that is not switched. – Use the correct Draper charger in conjunction with it’s corresponding battery pack (consult the Draper website for more information or to find your local stockist).
  • Page 10 – Before charging, read the instructions. – For indoor use. Do not expose to rain. – Only use Draper D20 battery packs with this product. Consult your Draper stockist for details. – Do not charge any other manufacturer’s battery packs using Draper chargers. Any other application is considered misuse.

  • Page 11: Connection To The Power Supply (Charger)

    HEALTH AND SAFETY INFORMATION 5.5 CONNECTION TO THE POWER SUPPLY (CHARGER) Caution: Risk of electric shock. Do not open. This appliance is supplied with a moulded 3 pin mains plug for your safety. The value of the fuse fitted is marked on the pin face of the plug. Should the fuse need replacing, ensure the substitute is of the correct rating, approved to BS1362 and ASTA or BSI Kite marked.

  • Page 12: Technical Description

    TECHNICAL DESCRIPTION 6.1 IDENTIFICATION 1/2" Square drive. ‘ON/OFF’ Trigger switch. Soft grip. Variable torque control. LED Worklight. Belt clip. Forward/reverse switch. - 12 -...

  • Page 13: Unpacking And Checking

    Lay the contents out and check them against the parts shown below. If any part is damaged or missing, please contact the Draper Help Line (the telephone number appears on the Title page) and do not attempt to use the product.

  • Page 14: Preparing The Impact Wrench

    PREPARING THE IMPACT WRENCH 8.1 BATTERY PACK CHARGING – FIGS. 1 – 2 This power product is either supplied “bare”, without battery pack or charger (Stock No.55365), or with a transformer/charger and 2 battery packs (Stock No.97777). Important: Only Draper designated battery packs and chargers can be used in conjunction with this product.

  • Page 15: Battery Pack Protection Features

    If there are no foreign objects, it is probable that the battery or charger is malfunctioning. Allow battery/charger to normalise and try again. If a fault remains after trying this then contact Draper Tools. Charge level Amount of charge 8.2 BATTERY PACK PROTECTION...

  • Page 16: Basic Impact Wrench Operations

    BASIC IMPACT WRENCH OPERATIONS 9.1 INSTALLING AND REMOVING SOCKETS – FIG.4 This wrench is supplied with a 1/2" Square drive Make sure to always use specific “Impact” sockets or accessories with this tool, use of chrome vanadium non-impact sockets could result in damage to your tool and/or personal injury.

  • Page 17: Variable Torque Control

    BASIC IMPACT WRENCH OPERATIONS 9.3 VARIABLE TORQUE CONTROL – FIG.6 The impact wrench has 5 pre-set torque settings, ranging from high to low: – Press the variable torque adjustment button to select the required torque setting. Each torque setting is indicated on the torque setting display –...

  • Page 18: Led Worklight

    BASIC IMPACT WRENCH OPERATIONS 9.6 LED WORKLIGHT – FIG.9 To aid use in confined and inadequately lit spaces, the LED worklight automatically illuminates when the trigger is activated. 9.7 OPERATION Proper fastening torque is determined by the kind of fastening, the size of the fastening or the material or workpiece.

  • Page 19: Maintenance And Troubleshooting

    10. MAINTENANCE AND TROUBLESHOOTING 10.1 MAINTENANCE Regular inspection and cleaning reduces the necessity for maintenance operations and will keep your tool in good working condition. The motor must be correctly ventilated during tool operation. Avoid blocking the air inlets and vacuum the ventilation slots regularly.

  • Page 20: Optional Accessories

    11. OPTIONAL ACCESSORIES 11.1 OPTIONAL ACCESSORIES A full range of accessories are available from Draper Tools. Please visit our website for details: www.drapertools.com - 20 -...

  • Page 21: Disposal

    12. DISPOSAL 12.1 DISPOSAL – At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is disposed of according to national regulations. – Contact your local authority for details of collection schemes in your area. In all circumstances: ●...

  • Page 22: Explanation Of Symbols

    13. EXPLANATION OF SYMBOLS 13.1 EXPLANATION OF SYMBOLS Single value noise marking. (Maximum declared A-Weighted Read the instruction manual. sound power level in decibels). Wear face mask and safety Class II construction glasses. (Double insulated). WEEE – Waste Electrical & Wear ear defenders.
  • Page 23 NOTES - 23 -...
  • Page 24 ©Published by Draper Tools Limited. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.

This manual is also suitable for:

97777

Table of Contents