Table of Contents
Advertisement
Quick Links
STORM
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND
GENERAL INFORMATION
These instructions accompanying the product are the original instructions. This document is part of the product, keep it
for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before
assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed, and
contains all the necessary information to ensure its correct and safe use. By following all the general safety instructions
contained in this manual, it will ensure both product and operator safety, together with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools policy
of continuous improvement determines the right to make modifications without prior warning.
20V Cordless
Impact Wrench
Stock No.82983
Stock No.01031
EFFECTIVE USE OF THIS PRODUCT.
INSTRUCTIONS FOR
Part No.CIW20LISF
Part No.CIW20GSF
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Draper Storm Force CIW20LISF
Summary of Contents for Draper Storm Force CIW20LISF
- Page 1 AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
-
Page 2: Title Page
Commercial copying, redistribution, hiring or lending is prohibited. No part of this publication may be stored in a retrieval system or transmitted in any other form or means without written permission from Draper Tools Limited. In all cases this copyright notice must remain intact. -
Page 3: Table Of Contents
CONTENTS 2.1 CONTENTS CONTENT PAGE TITLE PAGE INTRODUCTION ....................2 REVISION HISTORY..................2 UNDERSTANDING THIS MANUAL ..............2 COPYRIGHT NOTICE ..................2 CONTENTS CONTENTS ....................... 3 GUARANTEE GUARANTEE ....................4 INTRODUCTION SCOPE ......................5 SPECIFICATION ....................5 HANDLING & STORAGE .................. 5 HEALTH &... -
Page 4: Guarantee
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the guarantee period. -
Page 5: Introduction
INTRODUCTION 4.1 SCOPE This hand held, lithium-ion battery powered impact wrench is intended to tighten and loosen mechanical fixings (nuts, bolts, etc). There is no mechanism for adjusting or regulating the output torque. All fixings should be finished using a torque wrench. Warning! This wrench is very powerful and is capable of shearing off bolt heads. -
Page 6: Health & Safety Information
HEALTH & SAFETY INFORMATION 5.1 GENERAL SAFETY INSTRUCTIONS FOR POWER TOOL USE When using any type of power tool there are steps that should be taken to make sure that you, as the user, remain safe. Common sense and a respect for the tool will help reduce the risk of injury. Read the instruction manual fully. -
Page 7: Additional Safety Instructions For Impact Wrenches
5.2 ADDITIONAL SAFETY INSTRUCTIONS FOR IMPACT WRENCHES Important: Draper Tools Limited recommends that this machine should not be modified or used for any application other than that for which it was designed. If you are unsure of its relative applications do not hesitate to contact us in writing and we will advise you. -
Page 8: Residual Risk
HEALTH & SAFETY INFORMATION • There is a risk of danger to persons from high speed splinters being emitted from impact wrenches in the case of socket failure. Warning! Only use properly hardened impact sockets with this machine. – Unexpected direction of inserted tool movement can cause a hazardous situation. –... -
Page 9: Connection To The Power Supply
10. Before charging the battery, read the instructions. 11. Batteries are for indoor use. Do not expose to rain. 12. Only charge Draper battery (83079) in its designated charger (83077). 13. Do not charge any other batteries in the charger. Any other application is considered misuse. -
Page 10: Technical Description
TECHNICAL DESCRIPTION 6.1 IDENTIFICATION ½" Square drive (male) anvil. Belt clip. Variable speed trigger switch. Battery charger. Hand grip. Charger cable and plug. Gearbox. 20V Battery pack. Protective rubber bumper. Battery release/retention button. Forward/reverse drive selector switch. -
Page 11: Unpacking & Checking
Lay the contents out and check them against the parts shown below. If any part is damaged or missing; please contact the Draper Help Line (the telephone number appears on the Title page) and do not attempt to use the product. -
Page 12: Preparing The Impact Wrench
Warning! Check the condition of the charger and battery prior to each charge. If there is any sign of damage then do not commence charging, seek advice from Draper Tools. To charge the battery pack , it must first be removed from the tool. -
Page 13: Battery Pack Charge Status
PREPARING THE IMPACT WRENCH 8.2 BATTERY PACK CHARGE STATUS – FIG. 3 To display the amount of charge left in the battery pack press the charge level indicator button Charge level indicator Amount of charge remaining 0 – 10% 10 – 25% FIG.3 25 –... -
Page 14: Basic Operation
BASIC OPERATION 9.1 INSTALLING AND REMOVING SOCKETS – FIGS. 4 – 5 This wrench is supplied with a ½" Square Drive Note: Never use any sockets or accessories that are not hardened for impact use. To fit a socket: – Roughly align the hole in the impact socket with the sprung loaded ball detent located on... -
Page 15: Variable Speed Trigger
BASIC OPERATION 9.3 VARIABLE SPEED TRIGGER – FIG. 7 When the trigger is depressed, the drive will rotate (provided the direction switch is set in the forward or reverse position). This trigger switch is electronic which enables the user to vary the speed continuously. –... -
Page 16: Maintenance And Troubleshooting
10. MAINTENANCE AND TROUBLESHOOTING 10.1 MAINTENANCE Regular inspection and cleaning reduces the necessity for maintenance operations and will keep your tool in good working condition. The motor must be correctly ventilated during tool operation. Avoid blocking the air inlets and vacuum the ventilation slots regularly. 10.2 TROUBLESHOOTING Note: Remove the plug from the socket before carrying out adjustment, servicing or maintenance. -
Page 17: Disposal
11. DISPOSAL 11.1 DISPOSAL At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is disposed of according to national regulations. Contact your local authority for details of collection schemes in your area. In all circumstances: •... -
Page 18: Explantation Of Symbols
12. EXPLANATION OF SYMBOLS 12.1 EXPLANATION OF SYMBOLS Warning! Read the instruction manual. Warning! Wear eye protection. Warning! Wear ear defenders. Class II construction (Double insulated). WEEE Do not dispose of Waste Electrical & Electronic Equipment in with domestic rubbish. Lithium-ion product. - Page 19 NOTES...
- Page 20 - Sales Desk: (023) 8049 4333 - General Enquiries: (023) 8026 6355 - Service/Warranty Repair Agent For aftersales servicing or warranty repairs, please contact the Draper Tools Help Line for details of an agent in your local area. YOUR DRAPER STOCKIST RDCH0917...
Need help?
Do you have a question about the Storm Force CIW20LISF and is the answer not in the manual?
Questions and answers