Summary of Contents for Direct Supply Maxwell Thomas SEATING
Page 1
Maxwell Thomas ® SEATING Owner’s Manual STOP! Read this manual thoroughly before proceeding. Please keep and refer to this Owner’s Manual. Thank you for purchasing Maxwell Thomas seating. Please read this entire guide carefully and keep it for future reference. ®...
The product is distributed by Direct Supply Manufacturing, Inc. (“We,” “Us” or “Our”). “You” are the user, caregiver or any other individual(s) who may be using or servicing the product.
Warnings Read and follow all directions and warnings before use or assembly. Do not use or assemble if you do not understand the contents of this manual – contact your distributor for assistance. Damage, injury or even death may result from improper use of this product or not following directions and warnings.
Care & Maintenance Cleaning We recommend the following cleaning practices to help maintain the appearance of the wood surfaces and fabric of the Maxwell Thomas dining chair, cafe stool, resident room chair or stationary rocking chair. • CAUTION: DO NOT use water or water-based cleaning solutions, 100% bleach, abrasive cleaners, or similar cleaners or chemicals on this product, as such use may void the warranty of this product.
Directions for Use WARNING: Unpack the product in an area with sufficient room to work. Do not allow children, animals or individuals with impaired cognitive or physical abilities near the product until it has been completely set up and the work area has been cleared of all debris. Inspect the product for damage.
Page 7
How to Use the Kensington Non-Powered Lift Occasional Chair Ingress Make sure the Once seated, push the seat locking seat locking knob knob inward until it stops to lock the is pulled out from seat in the down position. the side stretcher before ingress.
Troubleshooting Adjusting the Weight of the Lifting Mechanism on the Kensington Non-Powered Lift Occasional Chair The Kensington Non-Powered Lift Occasional Chair is able to adjust for different-sized users. It has three settings that cover the vast majority of users. 1. Start by preparing an area to work on the chair. Place something on the floor to protect the wood finish.
Page 9
Kensington Non-Powered Lift Weight Setting Details The weight settings are highlighted below, and it is very important that the adjustment holes on the seat adjustment bracket are properly aligned with the adjustment holes on the gas-spring adjustment bracket. Red Setting = <100 - 150 lbs. NOTE: The locking pin must be set in the red holes on the seat adjustment bracket and the gas-spring adjustment bracket.
Page 10
The seat locking rod will not push all the way into the chair while seated Will need to install a new one. Contact your Direct Supply account manager for further assistance. Check that the black elastic fabric behind the seat is not interfering with the locking mechanism. This can be done by observing someone else using the chair and watching to determine whether the fabric moves away from the locking rod.
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE; THESE AND ALL OTHER IMPLIED WARRANTIES ARE SPECIFICALLY DISCLAIMED. TO THE FULLEST EXTENT ALLOWED BY LAW, DIRECT SUPPLY MANUFACTURING, INC. WILL NOT BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR LOST PROFITS THAT MAY RESULT FROM THE DEVICE OR YOUR USE OF OR INABILITY TO USE THE DEVICE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Need help?
Do you have a question about the Maxwell Thomas SEATING and is the answer not in the manual?
Questions and answers