3M SCPFXWMV2 Installation Instructions Manual page 8

9.3 Install the 2 screws into the arm retainer.
9.4 Pull the cable bundle through the hole at the end of
the arm extension.
9.5 Connect the cables to the projector according to the
Quick Start Guide.
9.6 Attach the optional security cable to the projector.
10.0 Align Projector
10.1 Power on unit and change image size by adjusting the
arm extension in or out.
10.2 Adjust projector aim by loosening the thumb screw.
10.3 Adjust vertical image position by turning the leveling
screw.
10.4 Adjust horizontal image position by loosening the
four mounting screws and adjusting the base left or
right. Tighten the mounting screws when finished.
8
™
3M Fixed Wall Mount SCPFXWMV2
© 2009 3M. All Rights Reserved.