IBM 2943 Manual page 48

Table 6. Adapter slot priorities and maximum PCI, PCI-X, and PCIe adapters supported (continued)
Feature Description
code
EN27 PCIe 2-port Async EIA-232 Adapter (FC
EN27; CCIN 57D4)
v PCIe, x1
v Short, with full-height tailstock
v PCIe 1.1
v Two ports through RJ45 by using the
DB9 connector
v EIA-232 Compatible
v OS support: AIX, IBM i, and Linux
operating systems
EN28 PCIe 2-port Async EIA-232 LP Adapter
(FC EN28; CCIN 57D4)
v PCIe, x1
v Short, low-profile
v PCIe 1.1
v Two ports through RJ45 by using the
DB9 connector
v EIA-232 Compatible
v OS support: AIX, IBM i, and Linux
operating systems
5269 POWER GXT145 PCI Express Graphics
Accelerator (FC 5269; CCIN 5269)
v Low-profile adapter
v Short, x1
v OS support: AIX and Linux operating
systems
EC41 PCIe2 LP 3D Graphics Adapter x1 (FC
EC41)
v PCIe 2.1, single lane (x1)
v Short, low-profile, half-length adapter
v Not hot-pluggable
v Passive cooling
v Supports two DVI-I displays with a
required breakout cable
v OS support: Linux operating system
v Supported on Firmware level 7.8, or
later
36
Power Systems: PCI adapter placement for the IBM Power 720 Express or IBM Power 740 Express
8202-E4B and 8205-E6B
3
Slot priorities Maximum
number of
adapters
supported
1, 3, 2, 4 12
5, 7, 6, 8 2
5, 7, 6, 8 4
8202-E4C, 8202-E4D,
8205-E6C, and 8205-E6D
3
Slot priorities Maximum
number of
adapters
supported
1, 2, 3, 4, 5 12
7, 9, 8, 10 2
7, 9, 8, 10 4
7, 9, 8, 10 4