IBM 2943 Manual page 41

Table 6. Adapter slot priorities and maximum PCI, PCI-X, and PCIe adapters supported (continued)
Feature Description
code
2
5900 PCI-X DDR Dual-x4 3 Gb SAS Adapter
(FC 5900; CCIN 572A)
v Short, 64-bit, 3.3 V
v Extra-high bandwidth
v Supports a dual controller mode in a
multi-initiator configuration
v OS support: AIX and Linux operating
systems
2
5902 PCI-X DDR Ext Dual-x4 3 Gb SAS RAID
Adapter (FC 5902; CCIN 572B)
v Long, 64-bit, 3.3 V
v Extra-high bandwidth
v The adapter must be connected and
configured in a dual controller mode in
a multi-initiator configuration, and this
configuration requires that the adapters
are installed in pairs.
v This adapter supports disk expansion
units. This adapter does not support
media expansion units.
v OS support: AIX and Linux operating
systems
2
5908 PCI-X DDR 1.5 GB cache SAS RAID
Adapter (FC 5908; CCIN 572F, 575C)
v Long, 64-bit, 3.3 V
v Extra-high bandwidth
v Generation 3 blind-swap cassette
v Double-wide adapter requires two
adjacent slots:
– 572F is the CCIN on the SAS
controller side of the double-wide
adapter.
– 575C is the CCIN on the write-cache
side of the double-wide adapter.
v OS support: AIX, IBM i, and Linux
operating systems
2
5912 PCI-X DDR Dual-x4 3 Gb SAS Adapter
(FC 5912; CCIN 572A)
v Short, 64-bit, 3.3 V
v Extra-high bandwidth
v Supports a dual controller mode in a
multi-initiator configuration
v OS support: AIX, IBM i, and Linux
operating systems
8202-E4B and 8205-E6B
3
Slot priorities Maximum
number of
adapters
supported
All slots have the 24 and 48
same priority
All slots have the 24 and 48
same priority
All slots have the 8 and 16
same priority
All slots have the 24 and 48
same priority
8202-E4C, 8202-E4D,
8205-E6C, and 8205-E6D
3
Slot priorities Maximum
number of
adapters
supported
All slots have the 24 and 48
same priority
All slots have the 24 and 48
same priority
All slots have the 8 and 16
same priority
All slots have the 24 and 48
same priority
PCI adapter placement
29