Using The Timer - Panasonic NN-E486MM Operating Instructions Manual

Using the timer

Kitchen Timer
Example: To count 5 minutes.
Press once.
Standing time
By using the Timer, you can program Standing Time after cooking is completed or use to program
the oven as a minute timer.
Example: To stand for 5 minutes after cooking at 3 minutes at Medium microwave power.
10
Micro Power min
Press 3 times. Press 3 times.
Set the desired Set the desired
cooking program. cooking time.
(See page 14 EN
for instructions.)
Delay start cooking
By using the Timer, you are able to program Delay Start cooking.
Example: To start cooking 5 minutes later at 3 mins. Medium microwave power.
10
min
Press once.
Press 5 times. Set
the desired amount
of delay time. (up to
99 min 50 secs)
„ Notes
1. Multi-stage cooking can be programmed including Delay Start and Standing Time.
2. If the oven door is opened during the Delay Start, Standing Time or Minute Timer,
the time in the display window will continue to count down.
3. Standing Time/Delay Start cannot be programmed before/after an auto program.
4. If the programmed delay time exceeds one hour, the time will count down in units of
minutes. If less than one hour, the time will count down in units of seconds.
5 times
10
min
Press 5 times. Set desired amount
of time. (up to 99 min 50 secs)
3 times
1 10
min sec
Press once.
5 times
1 10
min sec
Press 3 times.
Set the desired
cooking program.
(See page 14 EN
for instructions.)
1 10
min sec
5 times
10
min
Press 5 times. Set
the desired amount
of standing time.
(up to 99 min 50
secs)
3 times
10
Micro Power min
Press 3 times.
Set the desired
cooking time.
16
EN
Press Start. Time will
count down without
the oven operating.
1 10
min sec
Press Start.
Cooking starts.
After cooking,
standing time
will count down
without the
oven operating.
1 10
min sec
Press Start.
Delayed time
will count
down, then
start cooking.