Leica M10 Instructions Manual page 59

B. With thumbwheel 'programmed' accordingly
1. Select the menu item
Customize Control Customize Control
2. in the sub-menu
Customize Wheel Customize Wheel
3. in the respective sub-menu
4. confirm the function by pressing the Center button
5. Use the thumbwheel 28 to select the desired value.
C. Using the menu
1. Select the menu item
Exp. Compensation Exp. Compensation
• The monitor shows a scale as a sub-menu:
A
A Set compensation value (mark at
2. Set the desired value.
,
,
, and
Exp. Compensation Exp. Compensation
.
30
.
= switched off)
O O
Displays
– In cases A and B, the compensation value is displayed in the
viewfinder, for example
1.0- 1.0-
the shutter speed). Then in the form of changed shutter speeds
and a flashing dot at the bottom in the viewfinder, or for about
0.5s when the display is activated.
– Regardless of the setting method, the value is displayed in the
monitor in Live View mode and in the Information screen if the
viewfinder is being used by means of a mark in the lower part of
the light balance, and in the output menu list by means of
.
X X 1
Important:
An exposure compensation set on the camera only influences
metering of the available light, i.e. not flash light (for more informa-
tion about flash photography, refer to the sections starting on p.
182).
Regardless of how the set compensation was originally entered:
– It remains effective until it is manually reset to
whether the camera has been turned off and back on in the
meantime.
– It can be reset using either the menu or the thumbwheel.
± X X
Example, either plus or minus, "± " stands for the respective value
1
/ (temporary display instead of
0.3 0.3
EV+_ EV+_
, regardless of
0 0
EN
171