Leica M10 Instructions Manual page 45

To restrict the automatic setting range
4. Select the menu item
ISO Setup ISO Setup
5. in the sub-menu
Maximum Auto ISO Maximum Auto ISO
and
6. in the relevant sub-menus the desired values.
In the sub-menu, with the selected highest
Maximum Auto ISO Maximum Auto ISO
sensitivity, specify the range within which automatic setting is to
work. In the
Maximum Exposure Time Maximum Exposure Time
leave it to the camera to ensure camera shake-proof shutter
speeds - with one of the three focal length-specific settings
, , or specify the longest shutter speed yourself – be-
1/[2f] 1/[2f] 1/[4f] 1/[4f] 2
tween and . In the focal length-specific settings, the
1/2s 1/2s 1/500s 1/500s
camera only switches to a higher sensitivity if the shutter speed
would fall below the threshold due to low brightness, e.g. with a
50mm lens at speeds slower than
⁄ s at .
1
1/[4f] 1/[4f]
250
This function requires the use of coded lenses or setting of the lens type used in
2
150
the menu (see p. ).
,
, or
Maximum Exposure Time Maximum Exposure Time
sub-menu you can either
1/f 1/f
⁄ s at , or ⁄ s at , or
1 1/f 1/f 1 1/[2f] 1/[2f]
60 125
Note:
The following rule applies when using automatic bracketing (see p.
, 172): The sensitivity automatically determined by the camera for
the uncorrected picture is also used for all other pictures in a se-
ries, i.e. this ISO value is not changed during a series. This may
mean that the slowest shutter speed specified under
is exceeded.
Exposure Time Exposure Time
,
EN
Maximum Maximum
157