Behringer EXPANSION CARD X-DANTE Quick Start Manual page 21

21
Quick Start Guide
See the X32 PRODUCER line, which is configured for Clock Status
Master in the following example:
Note that the check boxes for 'Slave to External Word Clock' are
unchecked in this application.
Alternative Synchronization:
Use the internal X32 clock as master clock. In this case the
Setup/Config page should look like this:
Note that the status bar shows "L 44K1" and a green light for Local
(internal) clock of 44.1 kHz.
The second green light "C: Dante" indicates proper installation of
the X-DANTE card.