Page 18
Dis play Display Mode No controller data are trans m itted Controller data are rec eived but not transm itted Controller data are trans mitted but not rec eived Controller data are trans mitted and rec eived Mode Program changes are not transmitted Program changes are received but not transmitted Program changes are transmitted but not received Program changes are transmitted and received...
Page 28
Output Pin 1 Pin 2 = (+) Signal Pin 3 = (-) Signal Unbalanced use of mono 1/4" jack plugs Tip = Signal Sleeve = Ground / Shield Sleeve Strain relief clamp Input Cable Shield (+) Signal + Hum (-) Signal + Hum RFI and Hum Balanced use of stereo 1/4"...
Page 32
M IDI Implementation Chart Funktion Basic Default Channel Changed Default Mode Messages Altered Note Number True Voice Note ON Velocity Note OFF Key´s After Touch Ch´s Pitch Bender Control Progr. Change True # System Exclusive Song Pos System Song Sel Common Tune System...
Need help?
Do you have a question about the VIRTUALIZER PRO DSP1000P and is the answer not in the manual?
Questions and answers