AT&T Cingular Flip IV User Manual page 66

Safety precautions for power supply unit
Use the correct external power source
A product should be operated only from the type of power source indicated
on the electrical ratings label . If you are not sure of the type of power source
required, consult your authorized service provider or local power company .
For a product that operates from battery power or other sources, refer to the
operating instructions that are included with the product .
This product should be operated only with the following designated power
supply unit(s) .
Travel charger: Input: 100-240V, 50/60Hz, 0 .15A . Output: 5V, 1000mA
Handle battery packs carefully
This product contains a Lithium-ion battery . There is a risk of fire and burns if
the battery pack is handled improperly . Do not attempt to open or service the
battery pack . Do not disassemble, crush, puncture, short circuit the external
contacts or circuits, dispose of in fire or water, or expose a battery pack to
temperatures higher than 140°F (60°C) . The operating temperature for the
phone is 14°F (-10°C) to 113°F (45°C) . The charging temperature for phone is
32° F (0°C) to 113°F (45°C) .
Warning: Danger of explosion if battery is incorrectly replaced.
To reduce risk of fire or burns, do not disassemble, crush, puncture, short circuit
the external contacts, expose to temperature above 140°F (60°C), or dispose
of in fire or water . Replace only with specified batteries . Recycle or dispose of
used batteries according to the local regulations or reference guide supplied
with your product .
66