Care, Maintenance, & Cleaning - Walgreens WGNBPW-200 Manual

Automatic wrist blood pressure monitor
Table of Contents

Advertisement

Available languages

Available languages

CARE, MAINTENANCE, & CLEANING
• Clean the blood pressure monitor body and cuff carefully with
a slightly damp, soft cloth. Do not press. Do not wash cuff or
use chemical cleaner on it. Never use thinner, alcohol, or petrol
(gasoline) as cleaner.
• Leaky batteries can damage the unit. Remove the batteries when
the unit will not be used for a long time.
• Follow local ordinances and recycling instructions regarding
disposal or recycling of the device and device components,
including batteries.
• If the unit is stored near freezing, allow it to acclimate to room
temperature before use.
• This blood pressure monitor is not field serviceable. You should
not use any tool to open the device nor should you attempt to
adjust anything inside the device. If you have any problems
with this device, please contact HoMedics Consumer Relations
(contact information can be found in the Warranty section).
• DO NOT immerse the unit in water as this will result in damage to the unit.
• DO NOT subject the monitor or cuff to extreme temperatures,
humidity, moisture, or direct sunlight. Protect from dust.
• DO NOT fold the cuff tightly.
• DO NOT disassemble the monitor or cuff. If in need of repair,
refer to the Warranty section of this manual.
• DO NOT subject the monitor to extreme shock (do not drop
on floor).
22

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

899781

Table of Contents