Table of Contents
Advertisement
The following item appears only when you set Serial Port to [Enabled].
Change Settings
Allows you to select an optimal setting for Super I/O devices. Configuration
options: [Auto] [IO=3E8h; IRQ=7;] [IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12;] [IO=2E8h;
IRQ=3,4,5,6,7,9,10,11,12;] [IO=2F0h; IRQ=3,4,5,6,7,9,10,11,12;] [IO=2E0h;
IRQ=3,4,5,6,7,9,10,11,12;]
Serial Port 4 Configuration
Serial Port
Allows you to enable or disable the serial port (COM).Configuration options:
[Disabled] [Enabled]
The following item appears only when you set Serial Port to [Enabled].
Change Settings
Allows you to select an optimal setting for Super I/O devices. Configuration
options: [Auto] [IO=2E8h; IRQ=7;] [IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12;] [IO=2E8h;
IRQ=3,4,5,6,7,9,10,11,12;] [IO=2F0h; IRQ=3,4,5,6,7,9,10,11,12;] [IO=2E0h;
IRQ=3,4,5,6,7,9,10,11,12;]
3.3.13
NCT6116D HW Monitor
Q-Fan Configuration
CPU Q-Fan Control
[Disabled]
[PWM Mode]
CPU Fan Step UP/Down
This item appears only when you enable the CPU Q-Fan Control feature and
allows you to set the CPU Fan Step Up/Down time.
Configuration options: [0 sec] [2.1 sec] [2.8 sec] [3.6 sec] [4.2 sec] [5.0 sec] [6.3
sec] [8.5 sec] [12 sec] [25 sec]
CPU Fan Speed Low Limit
This item appears only when you enable the CPU Q-Fan Control feature and
allows you to disable or set the CPU fan warning speed. Configuration options:
[Ignore] [200RPM] [300 RPM] [400 RPM] [500 RPM] [600RPM]
CPU Fan Profile [Standard]
This item appears only when you enable the CPU Q-Fan Control feature and
allows you to set the appropriate performance level of the CPU fan.
[Standard]
[Silent]
3-12
Disables the CPU Q-Fan control feature.
Enable the CPU Q-Fan control in PWM mode for 4-pin CPU fan.
Sets to [Standard] to make the CPU fan automatically adjust
depending on the CPU temperature.
Sets to [Silent] to minimize the fan speed for quiet CPU fan
operation.
Q370I-IM-A R2.0
Advertisement
Table of Contents
