Table of Contents
Advertisement
2.5
Jumpers
1.
Clear RTC RAM (2-pin CLRTC)
This header allows you to clear the CMOS RTC RAM data of the system
setup information such as date, time, and system passwords.
Q370I-IM-A R2.0 Clear CMOS jumper
Connector type
To erase the RTC RAM:
1.
Turn OFF the computer and unplug the power cord.
2.
Use a metal object such as a screwdriver to short the two pins.
3.
Plug the power cord and turn ON the computer.
Hold down the <Del> key during the boot process and enter BIOS setup
4.
to re-enter data.
NOTE: If the steps above do not help, remove the onboard battery and move
the jumper again to clear the CMOS RTC RAM data. After clearing the CMOS,
reinstall the battery.
2.
Display panel backlight power selection (3-pin BLKT_PWR_SEL)
Q370I-IM-A R2.0 Back Light
Powe Selection jumper
12V
5V (Default)
Connector type
2-10
CLRTC
HEADER 1x2p, 2.54mm pitch, S/T
BKLPWR_SEL
1 2
12V
(Default)
HEADER 1x3p, 2.54mm pitch, S/T
2 3
5V
Pins
1-2
2-3
Q370I-IM-A R2.0
Advertisement
Table of Contents
