Table of Contents
Advertisement
16. Serial port connectors (10-pin COM2, COM3, COM4)
These connectors are for serial (COM) ports. Connect the serial port cables
to these connectors, then install the module to a slot opening at the back of
the system chassis.
Q370I-IM-A R2.0 Serial port (COM) connectors
Connector type
NOTE: The serial port cables are purchased separately.
17. Flat panel display brightness connector (6-pin LCD_BLKT_PANEL)
This connector is for the LCD panel brightness controls.
Q370I-IM-A R2.0 Inverter connector
Connector type
Chapter 2: Motherboard information
COM2、COM3、COM4
BOX header 2x5p, K10, 2.0mm pitch
LCD_BLKT_PANEL
WAFER 6p, 2.0mm pitch
PIN 1
PIN 1
BKL_PWR
BKL_PWR
LCD_ENABKLT_CN
LCD_BL_PWM_CN
GND
GND
2-23
Advertisement
Table of Contents
