Operation - Snapper XD 1696869 Owner's Manual

OPERATION

W A R N I N G
Do not allow hands, feet, or any other part of the body or clothing near the rotating tines or any other moving part. The tines
begin to rotate forward once the switch trigger is depressed. The tines continue to rotate until the switch trigger is released.
Failure to avoid contact could cause serious personal injury.
INSTALLING THE BATTERY (See Figure 7)
1. Align the battery (1) with the cavity on the cultivator.
2. Hold the unit.
3. Insert the battery in the opening until the battery release button (2) locks into place. You should hear a "click" once it is
installed.
REMOVE THE BATTERY (See Figure 7)
1. Press the battery release button (2). This will cause the battery （1） to raise out of the tool.
2. Hold the unit. Pull the battery (1) out of the cultivator.
NOTE: The battery fits into the unit snugly in order to prevent accidental dislodging. It may require a strong pull to remove it.
1
2
Fig. 7
12