Viessmann AQUAHOME 11-N Installation And Operation Manual page 8

Fig. 3
Fig. 3
Hard
water
Transformer
Inlet
For the
control head
Ant-spill security hose
(not included in the
delivery)
8
 insert thick end of the elbow pipe
to the connection piece from the
outer side of the brine tank
 the discharge hose - connection
point diameter 3/8", outer thread
(not supplied with the device) -
can be connected in the way
identical to the one referred in
point 1.

Important notice:
Main water flow
3/4'' connection
Outlet
3/4'' joint
Copper pipe
BY-PASS
VALVE
Discharge drain
4 cm gap
-
-
-
Treated
water
Fastening clamps
pipe
Seal and nut
Washings
hose
CAUTION: The washings hose and anti-spill
security hose must be fastened to the discharge
drain
overflow hose of the brine tank
serves only as additional
safety feature in case the filling
of the brine tank with water is
not ended in accordance to the
program.
no part on the overflow hose
can be placed above the
outflow level (fig. 3)
the overflow hose of the brine
tank must not be connected to
the outflow stub pipe of the
control valve (see point 1
above).
3/4'' connection
pipe
3/4'' joint
3/4'' nut
Copper pipe
Seal