Clarke CS69D Operation & Maintenance Instructions Manual page 8

INVENTORY
The CS69D sander is supplied with the following items which will require
assembly.
• Stand assembly kit, comprising: - 2 x side panels, 2 x short cross members,
2 x long cross members, 4 x rubber feet with flat washers & nuts, 12 x M8
coach bolts /12 x M8 plain washers/12 x M8 nuts.
• 1 x Hex wrench (long)
• 1 x Spanner (10-13mm)
• 1 x Workstop
• 1 x Drive housing
• 1 x Sanding face plate
• 1 x Drive cover c/w fixing screws
• 1 x Small (motor) pulley
• 1 x Large (driven) pulley
• 1 x Drive belt
• 1 x Work table assembly
• 1 x Table support rod
• 1 x Mitre fence assembly
• 1 Fixing kit containing, grubscrews, parallel keys, 4 x bolts,4 x spring
washers, 4 x large washers (sander to stand fixings), workstop retaining
bolt/washer.
• 1 x Abrasive disc
• 1 x Abrasive belt
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
8