PROEL V10WAVE User Manual page 9

Active portable sound systems
Table of Contents

Advertisement

Available languages

Available languages

22.
NEXT SONG
Use it to skip to next song with a shortly press and release action or fast forward the current song
keeping it pressed for a longer time.
23. LCD DISPLAY
The LCD DISPLAY shows several data:
24. POWER
Use this switch to power ON or OFF the loudspeaker. It is "ON" when the switch is in the "I" position.
25. AC~ SOCKET
Here's where you plug in your mains supply cord. You should always use the mains cord supplied with the
device. Be sure that your device is turned off before you plug the mains supply cord into an electrical
outlet.
26. FUSE holder
Here is where the mains protection fuse is placed.
REPLACE THE PROTECTION FUSE ONLY WITH THE SAME TYPE.
IF, AFTER THE REPLACEMENT, THE FUSE BLOWS AGAIN, DO NOT TRY TO REPLACE IT AND CONTACT
THE NEAREST PROEL SERVICE CENTER.
27. LINE VOLTAGE
This switch sets the AC voltage line of your country (usually it is set by factory and isn't necessary to change
it). The 115V setting is for mains line in the range of 100-120V~ and 230V setting is for mains line in the
range of 220-240V~.
WARNING: an incorrect setting of AC LINE VOLTAGE could damage seriously the internal
electronics!
9

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

V12wave

Table of Contents