PROEL V10WAVE User Manual page 8

✓
How to link two loudspeakers with Bluetooth: the BT LINK function allows you to play stereo
tracks on two V WAVE loudspeaker linked together. The MASTER loudspeaker will reproduce the
left channel and the SLAVE loudspeaker will reproduce the right channel.
• The MASTER loudspeaker must be already linked with your Bluetooth device with the
procedure described above.
• Turn on the SLAVE loudspeaker and press its MODE button until the display shows
• Then press the BT LINK button on the SLAVE loudspeaker and the display will show
• Wait a few moment (5 to 10 seconds) until the Bluetooth symbol on the display is steady,
meaning that the connection is established between the SLAVE and the MASTER. A double note
reproduced from both loudspeakers confirms the successful linking between them: just press
play on your Bluetooth device and your music will be played in STEREO from both loudspeakers.
• In case the Bluetooth symbol
also in the MAIN loudspeaker.
NOTE: the BT LINK function allows to link the speakers only for playing music from a Bluetooth
source. If you want to reproduce the instruments connected to the input channels of the first
loudspeaker also on a second loudspeaker, you need to connect them physically using a XLR-XLR
cable from the LINE OUT of the MASTER one to the LINE IN of the SLAVE one. Please do not use BT
LINK and cable connection at same time.
NOTE: for using BT LINK the two loudspeakers must be in the range of 10 m (33 feet).
18. BT LINK
Use this button to link two loudspeakers thru Bluetooth (see above).
19. PLAY/PAUSE
This button plays or pauses the current audio file: during the play the display shows the elapsed time.
appears on display when the song is paused. Pressing again the button the song is resumed from
the latest position. NOTE: when using Bluetooth neither elapsed time nor
20. PLAY MODE
This button changes the play mode of the audio files. A brief temporary text on the display shows the
current mode.
ALL: normal forward play of all songs contained in all memories and all folders. When the last
song is played, it will restart from the first.
SINGLE ONE: it plays only the current song and repeat it indefinitely.
RANDOM: it plays all songs contained in all memories and all folders randomly.
FOLDER: it plays all song contained in the current folder.
✓
Brief explanation of how the player works. When you insert an SD memory card or USB flash drive
in the respective slot, the player scrolls the entire content of the memory locating all audio file that
can be played (files with .WAV .MP3 .WMA. APE .FLAC extensions). All files will be played in
numerical and alphabetical order, considering first the "name of the folder" and then the "name of
the file".
21. PREVIOUS SONG
Use it to skip to previous song with a shortly press and release action or rewind the current song
keeping it pressed for a longer time.
8
on the display keeps on flashing, try to press the BT LINK button
are shown.