Leckey KIT User Instructions page 82

8.10 Angle Adjustable
Thoracic Laterals
To adjust the angle of the laterals, loosen the
screws (A) at the hinges. Contour the laterals
to the required angle. Retighten the screws.
The laterals have a small degree of depth
and rotational adjustment for more proximal
positioning. Loosen screws (B) adjust the pad
and retighten the screws securely.
A
B
B
8.11 Shoulder Support
The shoulder support can be adjusted
in a number of ways – height, depth
and angle.
To adjust the height or the depth, remove
the spine upholstery shroud, loosen the two
screws (A) on either side of the mounting
bracket. Move the shoulder support to the
required position. Retighten the screws and
replace the spine upholstery shroud.
If further height adjustment is required, please
refer to the section on Backrest Height.
The Size 2 shoulder support can also be
attached to the Size 1 seat to further increase
the backrest height.
A