Leckey KIT User Instructions page 81

8.9 Standard and Complex
Thoracic Laterals
The standard and complex laterals, horizontal
and vertical options can be used in whatever
combination is most suited to the user's
requirements. It is possible to attach more
than one lateral to the same side of the
thoracic support if required.
To adjust the height, width or angle of these
laterals, loosen the screw (A) on the lateral
mounting. Position the lateral at the required
height, width and angle. Retighten the screw.
A
The complex laterals can also be angled to
allow the pad to contour to the user's shape.
To adjust loosen the screw (B) at the centre
of the pad, angle the pad to the required
position and retighten the screw.
All of the laterals can be flipped away to aid
transfer, by pulling the pin (C) at the back and
rotating the support out of the way.
A
B
C