Northern Telecom Flash Voice Mail Light 2 Installation Manual page 29

Reinstalling Flash
To change the Feature Code range or Group List availability you may need
to reinstall Flash.
Important: When you reinstall Flash, all of the configuration programming
is erased.
To reinstall Flash:
Log:
QUIT RETRY
Admin
MBOX AA OTHR
Pswd:
RETRY
Reset database?
NO
Resetting...
After the reinstall is complete, you must initialize Flash as described earlier
in this guide and re-enter configuration programming.
P0908433 01
1. Enter the System Administration Feature
Code.
The default code is
2. Enter the System Coordinator mailbox
number and password and press OK.
Refer to Table 4, "System Coordinator
mailbox number and default password," on
page 15.
⁄
3. Press .
‡‹›fl‡°¤fifi
4. Enter the reinstall password
and press OK.
5. Press YES.
When the system has been reinstalled
(approximately four minutes), the display
shows System Ready and Exit. The display
then returns to the Norstar date and time.
ƒ · ° ‹
(REINSTALL)
Flash Installation Guide
23
.