Initializing Flash Voice Mail Light Or Flash Voice Mail - Northern Telecom Flash Voice Mail Light 2 Installation Manual

Codes: F980-F989
CHNG

Initializing Flash Voice Mail Light or Flash Voice Mail

When you initialize Flash Voice Mail Light or Flash Voice Mail, you choose
the language and group list settings that will be used.
To initialize Flash Voice Mail Light or Flash Voice Mail:
Pswd:
RETRY
SN:xxxxxxxxxxxxx
Key:
QUIT RETRY
Bilingual:N
NO
P0908433 01
2. Press OK to use the high Feature Code range.
Press CHNG and then OK if you want to use
the low range of Feature Codes.
1. Enter the System Administration Feature
Code.
The default code is
¤ fl fl ‹ › ›
2. Enter
and press OK.
3. Record the serial number and press OK.
This serial number is required if you are
upgrading a system to add Flash Voice Mail
to an existing Flash ACD system.
4. Press OK to initialize this system as Flash
Voice Mail Light or Flash Voice Mail only.
To upgrade an existing Flash ACD system to
add Flash Voice Mail, you must enter a
software key code and then press OK.
Instructions on how to obtain a software key
code are in the Flash Voice Mail Upgrade
Guide.
5. Press YES to have display and voice prompts
available in both languages.
Press NO to have display and voice prompts
available in one language.
ƒ · ° ‹
(C O N F I G)
Flash Installation Guide
13
.